英文合同模板匯編七篇

　　隨著人們法律意識的建立，合同對我們的約束力越來越不可忽視，它可以保護民事法律關系。那么常見的合同書是什么樣的呢？以下是小編為大家收集的英文合同7篇，希望對大家有所幫助。

英文合同 篇1

　　Contract No.:XXX

　　Sales and Purchase ContractFOR

　　Manganese Ore

　　This contract is made and entered into onXX, Feb 20xx under terms and conditions as per the international chamber of commerce-600 (ICC UCP-600/20xx revision) by and between:

　　The Buyer:

　　Address:

　　Tel:

　　The Seller :

　　Address:

　　Tel:

　　Whereby seller agrees to sell to buyer and Buyer agrees to buy from seller Manganese Ore under following the terms and conditions stipulated below:

　　Article 1 Commodity

　　Concentrated manganese Ore

　　Article 2 Specifications

　　Concentrated Manganese Ore

　　Size: 0-5mm (90% min)

　　% Mn min. 40.0%

　　% Fe max. 15.0%

　　% Silica ( SiO2 ) max. 1.0%

　　% Aluminum ( Al ) max. 4.0%

　　% S max. 0.20%

　　% P max. 0.10%

　　Moisture max. 7%

　　Article 3 Quantity:

　　500 MT, partial shipment not allowed.

　　Article 4 Origin and Port of loading

　　4.1 Republic of ABC

　　4.2 Loading port:

　　Article 5 Packing/Delivery

　　5.1 In50 kg sack

　　5.2 Incontainer Shipment, more or less 20 tons.

　　Article 6 Shipment/Delivery

　　6.1 500MT(+/-5%)partial shipment not allowed

　　6.2 Shipment will be 90 days after signing of this contract and after the acceptance of the Letter of Credit by seller’s bank. L/C will be openedafter BuyerreceivingProforma Invoice from Sellerwith confirmation of the delivery schedule.

　　6.3 The Buyer has the right to appoint the independent surveyor or his representative to conduct the Pre-shipment Inspection and/or conduct the joint-inspection of the material with buyer for his own account.

　　Article 7 Contracted Price and Values

　　Price:Mn: 48% and above - USD0.00/%/DMTCFRCY Port, China

　　40% - 47.9% - USD 0.00 /%/DMTCFRCY Port, China

　　The Mn content will be average of the joint-inspection testing result at loading port.

　　Article 8 Payment

　　8.1 Payment shall be effected in full by an irrevocable Letter of Credit, which will be opened by 1stclass bank in Hong Kong or Singapore, 100% at sight upon presentation of shipping documents.

　　A. Seller’s Banking Details:

　　Bank Name :

　　Bank Address :

　　Account Name :

　　S.W.I.F.T. CODE SWIFT :

　　B. Buyer’s bank issues L/C to the Seller's bank via S.W.I.F.T. wire transfer.

　　Buyer’s Banking Details:

　　Bank Name : (will be advised)

　　Bank Address :

　　Account Name:

　　S.W.I.F.T. Address SWIFT :

　　Article 10 Inspection of Analysis & Weight

　　The shipmentinspection and analysis shall be done byCCICappointed by the Seller and one independent surveyor (i.e.: SGS or Geo-Chem, etc) appointed by the buyeras agreed by both parties at site before loading to container. While final weightand qualitydetermination shall be done atloadingportby the above joint-survey.Moisture content shall be deducted from the total weight shipped.

　　Article 11 Documents

　　Seller shall present the following documents to the buyer:

　　A. Signed Commercial Invoice for 100% of the total cargo value indicating, quantity, unit price and the total Amount of Value of the delivered commodity , 1 original and 3 copies.

　　B. Certificates of quantity, quality and weight issued byCCICand one independent surveyor appointed by the buyer.

　　C. Certificate of Origin issued by ABC Department Of Trade or concerned Government authorities, I original and 2 copies.

　　D. Weight List, showing total weight , 1 original and 3 copies.

　　E. Bill of Lading, 3 original copies and 3 non-negotiable copies.

　　Article 12 Force Majeure

　　The Seller shall not be responsible for the delay of shipment or non-delivery of the goods due to Force Majeureunder UCP 600. The seller shall advise the buyer immediately of the occurrence mentioned above and within 3 days thereafter the seller shall send a notice by courier to the buyer of their acceptance of a certificate of the accident issued by the local chamber of commerce under whose jurisdiction the accident occurs as evidence thereof. Under such circumstances the seller , however, are still under obligation to take all necessary measures to hasten the delivery of the goods. In case the accident lasts for more than 60 days the buyer shall have the right to cancel the Contract.

　　Article 13 Arbitration

　　All disputes arising out of or in connection with this Contract shall be finally resolved by arbitration in accordance with the Rules of Arbitration of the International Chamber of Commerce (UCP-600/20xx or Uniform Customs and Practice for Documentary Credits) by one or more arbitrators appointed in accordance with the said rules. The arbitration shall be conducted in ABCbythe English language.

　　Buyer Seller

　　關于購貨合同：

　　其中購貨合同指的是企業作為需向供貨廠商（供方）采購材料，按雙方達成的協議，所簽訂的具有法律效力的書面文件，又稱訂購合同。

　　對于購貨合同是指企業作為需向供貨廠商(供方)采購材料，按雙方達成的協議，所簽訂的具有法律效力的書面文件，又稱訂購合同。購貨合同只有在合同條款不與企業所在地國家與地方實施的`現行法律、法規和條例等相抵觸，經合同有關雙方相互承諾，并且合同各方在簽訂合同前沒有欺騙對方的行為時才具有完全的法律效力。

英文合同 篇2

　　Contract for Equipment Sales and Technology Licensing

　　Contract No. ____________________

　　This Contract (hereinafter referred to as the “Contract”) is made and entered into as of ________ (the date of signature ) in ________ (the place of signature) through friendly negotiation by and between _____________, a company incorporated and existing under the laws of ____________ with its registered address at _________________________________, and with its principal place of business at _________________________________ (hereinafter referred to as the “Buyer”), and ____________________, a company incorporated and existing under the laws of the People’s Republic of China with its registered address at _________________________________, and with its principal place of business at _________________________________(hereinafter referred to as the “Seller”).

　　Whereas, the Buyer desires to engage the Seller to provide the Equipment, related design, Technical Documentation, Technical Service and Technical Training and to obtain from the Seller a license of Patent and/or Know-how in relation to the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products. Now it is hereby mutually agreed as follows:

　　Article 1 Definitions

　　1.1 “Acceptance ”means the Buyer accepted the Equipment in accordance with Article 11.5.

　　1.2 “Commissioning” means the operation of the Equipment in accordance with Article 11.4 for the purpose of carrying out Performance Test.

　　1.3 “Contract” means this Contract signed by and between the Buyer and the Seller, including Appendices attached which shall form an integral part of this Contract.

　　1.4 “Contract Products” refers to all types of the products manufactured with Patent and/or Know-how under the Contract, details of which are specified in Appendix 1.

　　1.5 “Destination Airport” refers to _____________Airport.

　　1.6 “Effective Date of the Contract” means the date when the Contract enters into force upon fulfillment of all the conditions stated in Article 18.1.

　　1.7 “Equipment” means the equipment, machinery, instruments, spare parts and materials supplied by the Seller as listed in Appendix 3.

　　1.8 “Erection” means placing the Equipment to the positions according to the design drawings, and connecting it with relevant equipment and utilities.

　　1.9 “Improvement” refers to new findings and/or modifications made in the validity period of the Contract by either party on Patent and/or Know-how in the form of new designs, formulas, recipes, ingredients, indices, parameters, calculations, or any other indicators.

　　1.10 “Job Site” means the site where the Equipment shall be located and/or erected, namely ____.

　　1.11 “Know-how” refers to any valuable technical knowledge, data, indices, drawings, designs and other technical information, concerning the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment as well as manufacture of the Contract Products, developed and owned or legally acquired and possessed by the Seller and disclosed to the Buyer by the Seller, which is unknown to either public or the Buyer before the Date of Effectiveness of this Contract, and for which appropriate protection measures have been taken by the Seller for keeping Know-how in secrecy. The specific description of Know-how is set forth in Appendix 3.

　　1.12 “Last Shipment” means the shipment with which the accumulated invoice value of shipped goods has reached ____ ( ) percent of the total Equipment price.

　　1.13 “Patent” refers to any and all of the effective patent rights possessed by the Seller and licensed to the Buyer under the Contract in connection with the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products, the No. and list of which are set forth in Appendix 3.

　　1.14 “Performance Test” means the tests for examining whether the Equipment is able to meet guarantee figures specified in Appendix 1.

　　1.15 “Technical Documentation” means the technical indices and data, specifications, drawings, processes, technical and quality standards, and other documents carrying the descriptions and explanations of Patent, Know-how and other technical information, in connection with the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products, to be provided by the Seller as listed in Appendix 4.

　　1.16 “Technical Service” means the technical instruction, assistance and guidance rendered by the Seller as per Appendix 6.

　　1.17 “Technical Training ” means the training rendered by the Seller as per Appendix 7.

　　1.18 “Test Run” means the initial run of a single machine or the whole system of the Equipment without materials.

　　1.19 “Warranty Period” means the period of the warranty given by the Seller as specified in Article 12.2, during which the Seller is responsible for the defects of the Equipment as per Article 12.

　　Article 2 Scope of the Contract

　　2.1 The Seller’s Obligation

　　2.1.1 The Seller shall supply the Equipment, provide the design, Technical Documentation, and conduct the Technical Service and Technical Training, and grant the Buyer a right to use the Patent and/or Know-how as set forth in the Contract.

　　2.1.2 The Seller shall supply the Equipment which is listed in Appendix 3, the specification is detailed in Appendix 1.

　　2.1.3 The Seller shall provide design in accordance with Appendix 5, and submit to the Buyer the Technical Documentation listed in Appendix 4.

　　2.1.4 The Seller shall conduct the Technical Services at the Job Site as per Appendix 6.

　　2.1.5 The Seller shall conduct the Technical Training as per Appendix 7.

　　2.2 The Buyer’s Obligation

　　2.2.1 The Buyer shall at his own costs and expenses, provide the Seller with all information and data concerning the design as per Appendix 2. The Buyer shall ensure the completeness, correctness and accuracy of all such information and data.

　　2.2.2 The Buyer shall at his own costs and expenses, obtain all necessary import permits, undertake customs clearance, take delivery of the Equipment to be supplied by the Seller and transport them to the Job Site in time.

　　2.2.3 The Buyer shall at his own costs and expenses, perform all the civil works, construction, Erection, Test Run， Commissioning and Performance Test in accordance with the Technical Documentation under the Technical Services rendered by the Seller as per Appendix 6.

　　2.2.4 The Buyer shall at his own costs and expenses, supply all the equipments, spare parts and facilities required, except for the Equipment supplied by the Seller as per Appendix 3.

　　2.2.5 The Buyer shall at his own costs and expenses, provide the qualified and appropriate technical personnel, labor, tools, utilities and the Job Site in time for Erection, Test Run, Commissioning, and Performance Test as specified in Appendix 2.

　　2.2.6 The Buyer shall at his own costs and expenses, perform necessary administration and security guard at the Job Site.

　　Article 3 Grant of License

　　3.1 The Seller agrees to grant to the Buyer and the Buyer agrees to obtain from the Seller a license to manufacture the Contract Products as well as to conduct Erection, Test Run, Commissioning, Performance Test, operation and maintenance for the Equipment with Patent and/or Know-how as well as to use and sell the Contract Products. The name, model, specification, and technical data of the Contract Products are detailed in Appendix 1. The Buyer shall not make use of Patent and/or Know-how for any purposes other than those stipulated in the Contract without prior written approval from the Seller. The annual output of the Contract Products manufactured by the Buyer shall in no case exceed _______________.

　　3.2 (Option 1) The license granted under the Contract shall be an exclusive license. The Seller shall not retain its right to grant the licenses to any third parties, or to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

　　(Option 2) The license granted under the Contract shall be a non-exclusive license. The Seller shall retain its right to grant the licenses to any third parties, and to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

　　3.3 The license granted under the Contract shall be a non-transferable and non-sublicensing license, under which the Buyer shall neither be entitled to transfer nor grant sub-license to any third party without prior written approval from the Seller.

　　3.4 Territory

　　3.4.1 The Seller agrees to grant the license to the Buyer only within the territory of _________________ (country or region). The Buyer shall not explore Patent and/or Know-how in any place other than the Job Site without previous written consent of the Seller.

　　3.4.2 The Seller agrees to grant a license to the Buyer to use and sell the Contract Products only within the territory of ________________________ (Country or region). In case the Buyer fails to perform its obligations under this Clause, all the actual losses and damages thus incurred to the Seller shall be borne by the Buyer, and the Seller shall have the right to terminate the Contract without prejudice to any remedies specified in the Contract.

　　Article 4 Price

　　4.1 The Buyer agrees to pay the total Contract price, Technical Training and Technical Service fee to the Seller.

　　4.2 The total Contract price, including price of the Equipment, design, Technical Documentation and a license fee in a fixed amount, shall be __________(say _______________________ only).

　　The breakdown price is as follows:

　　The price for Equipment is __________(say _______________________ only).

　　Fee for design is __________(say _______________________ only).

　　Fee for Technical Documentations is __________(say _______________________ only).

　　License fee is __________________(Say: _________________ only)

　　4.2.1 The total Contract price for the Equipment is for delivery CIF_____ Port, and the Technical Documentations is for delivery CIP (by air) ______ Airport. CIF and CIP term shall be interpreted in accordance with INCOTERMS 20xx, issued by the INTERNATIONAL CHAMBER OF COMMERCE (ICC).

　　4.2.2 The total Contract price includes the price for spare parts listed in Appendix 3. However, the total Contract price does not cover the supply of any other spare parts. At the Buyer’s request, the Seller may provide with any other spare parts. A separate agreement shall be signed between the parties.

　　4.2.3 The above price is fixed and firm.

　　4.3 The total Contract price does not cover the Technical Service fee and Technical Training fee specified in Appendix 6,7.

　　4.4 The total Contract price as well as the Technical Training and Technical Service fee shall not be regarded or in any way be explained or interpreted as covering any of the custom duties, taxes, or charges, fees, and expenses unless expressly listed in the Contract.

　　Article 5 Payment

　　5.1 Down Payment

　　Within ____ ( ) days after signing the Contract, the Buyer shall pay ____ ( ) percent of the total Contract price amounting ____ by T/T to the Seller.

　　......................The Beginning of Option.......................

　　5.2 [Option One: Payment by Sight L/C]

　　The balance of the total Contract price amounting ___ ( says ___ only ) shall be paid by an irrevocable Letter of Credit at sight, issued within ___ ( ) days after signing the Contract by a reputable bank in ___ acceptable to the Seller in favor of the Seller. The Letter of Credit shall be available upon the presentation of the following documents till ______(specific expiration date or a specific circumstance for the expiration of the Letter of Credit).

　　5.2.1 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

　　(a) Bill of Lading in one (1) original and ___ ( ) copies;

　　(b) Commercial Invoice in one (1) original and ___ ( ) copies;

　　(c) Packing list in one (1) original and ___ ( ) copies;

　　(d) Certificate of Origin in one (1) original and ___ ( ) copies;

　　(e) Insurance Policy in one (1) original and ___ ( ) copies;

　　5.2.2 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

　　(a) One (1) copy of the Acceptance Certificate signed by the Buyer as per Article 11.5, or the Seller’s written statement specifying the lapse of more than seven (7) days after the Seller’s notice requesting the Buyer to issue the Acceptance Certificate in accordance with Article 11.5;

　　(b)One ( 1 ) copy of commercial invoice.

　　5.2.3 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

　　a) One (1) original Letter of Retention Guarantee in the form of Appendix 10;

　　b) One (1) copy of Commercial Invoice.

　　5.2 [Option Two: Payment under a L/G]

　　The balance of the total Contract price amounting ___ (say ___ only ), plus interest for deferred payment in the amount of ___ (say ___ only ), totaling ___ (say ___ only ) as detailed in Appendix 12 shall be paid by the Buyer by installments as specified in Appendix 12 and backed by an irrevocable Letter of Guarantee in favor of the Seller as per the Appendix 11, issued within ___ ( ) days after signing the Contract by the reputable bank in ____ acceptable to the Seller.

　　......................The End of Option.......................

　　5.3 All the banking charges incurred in the Seller’s bank shall be borne by the Seller while those incurred outside the Seller’s bank shall be borne by the Buyer.

　　Article 6 Delivery of Equipment and Technical Documentation

　　6.1 The Delivery of the Equipment

　　6.1.1 The delivery of the Equipment listed in Appendix 3 shall be completed within ____ ( ) months from the Effective Date of the Contract.

　　6.1.2 Within ____ ( ) months after the Effective Date of the Contract, the Seller shall send to the Buyer a preliminary delivery schedule by fax.

　　Not later than ____ ( ) days before the first shipment, the Seller shall submit to the Buyer the final delivery schedule in three (3) copies indicating Contract number, dispatch number, name of the Equipment, quantity, approximate dimensions, volume of each package and time of each shipment.

　　6.1.3 The port of shipment is ____, while the port of destination is ____.

　　6.1.4 Advance shipment, partial shipment and transshipment are allowed, however, the Seller shall inform the Buyer thirty (30) days before such shipment.

　　6.1.5 The date of Bill of Lading for each shipment shall be considered as the actual delivery date.

　　6.1.6 The Seller shall notify the Buyer by fax of the following within five (5) working days after each shipment is effected:

　　(a) Contract number

　　(b) Name of the vessel and loading port

　　(c) Name of the Equipment shipped

　　(d) Number and date of Bill of Lading

　　(e) Total volume

　　(f) Total gross and net weight

　　(g) Total number of packages/cases

　　6.1.7 The Seller shall airmail the following documents in duplicate to the Buyer:

　　(a) Bill of Lading

　　(b) Commercial Invoice

　　(c) Packing List

　　(d) Certificate of Origin

　　(e) Insurance Policy.

　　6.2 The Late Delivery of the Equipment

　　6.2.1 If the Seller fails to deliver the Equipment in accordance with the final delivery schedule, the Seller shall pay to the Buyer liquidated damages for such delay at the following rates:

　　(a) From the first week to the fourth week, the liquidated damages shall be

　　____ ( ) percent of the value of the delayed portion of the Equipment per

　　week

　　(b) From the fifth week to the eighth week, the liquidated damages shall be

　　____ ( ) percent of the value of the delayed portion of the Equipment per week

　　(c) From the ninth week, the liquidated damages shall be ____ ( ) percent of

　　the value of the delayed portion of the Equipment per week

　　6.2.2 The fractions of four days or more shall be counted as one week and fractions of less than four days shall be omitted. The total aggregate amount of the liquidated damages shall not exceed ____ ( ) percent of the value of the delayed portion Equipment.

　　6.2.3 The Seller shall be released from the liability to the Buyer whatsoever in respect of the late delivery after his payment of liquidated damages in accordance with Article 6.2. Notwithstanding the Seller’s payment of the liquidated damages for the late delivery Equipment, the Seller shall not be released from his obligation to deliver the Equipment.

　　6.3 The Delivery of the Technical Documentation

　　6.3.1 The Technical Documentation listed in Appendix 4 shall be delivered CIP ____airport by air within ____ ( ) months after the Effective Date of the Contract.

　　6.3.2 The date of airway bill shall be regarded as the actual delivery date of the Technical Documentation.

　　6.3.3 Within ____ ( ) working days after sending each lot of the Technical Documentation, the Seller shall inform the Buyer of the Contract number, item number, number and date of airway bill and the flight.

英文合同 篇3

　　房地產買賣協議

　　SALES CONTRACT FOR REAL ESTATE

　　出售方：（以下簡稱“甲方” ）

　　買受方： （以下簡稱“乙方” ）

　　中介方：上海臣信房地產經紀有限公司 （以下簡稱“丙方” ）

　　Seller: （hereinafter “Party A” ）

　　Buyer: (hereinafter “Party B”)

　　Broker：Shanghai Chenxin Real Estate Co., Ltd. （hereinafter “Party C” ）

　　經丙方中介介紹，甲、乙雙方就上海市__________區__________路______弄__________號______室及__________車位（以下簡稱“該房地產”）的轉讓事宜，簽訂本協議，協議內容如下（有□選擇的，以√為準）：

　　With the introduction of Party C, Party A and Party B enter into the agreement concerning the transfer of ____ Suite and its ancillary carport located at ____ of _____ Alley, _____Avenue _____District of Shanghai (hereinafter as “Real Estate”) detailed as follows (“√” shall be filled in the corresponding“□”, if appropriate):

　　一、 【該房地產基本情況】

　　1. BASIC INFORMATION

　　1、 該房地產：房地產權證書號為：______________；房屋面積：____________平方米；車位面積：___________平方米。

　　2、 該房地產 □ 已 □ 未設定抵押。

　　3、 該房地產 □ 已 □ 未出租。若該房地產已出租，則甲方應保證承租人已經放棄優先購買權，若因承租人以優先購買權引發糾紛，則甲方愿意承擔全部法律責任。

　　4、 有關該房地產的權屬情況，若上述填寫資料與實際情況不符或不詳盡的，以上海市房地產登記簿記載的信息為準。

　　1) Certificate of title to this real estate is numbered as __________ with floor space of ______ ㎡and the related carport are ______ ㎡.

　　2) Mortgage is made on this real estate: □ Yes □ No.

　　3) This real estate has been leased: □ Yes □ No. If “Yes”, Party A shall guarantee that lessee has waived the right of preemption. Any and all legal liabilities arising out of or in connection with the exercise of such rights by lessee shall be borne by Party A.

　　4) If the title of this real estate mentioned above is not clearly indicated or is incorrect, information listed in the register of Shanghai Real Estate Office shall be applied.

　　二、 【轉讓總價及定金與款項的選擇適用】

　　2. TRANSFER PRICE AND DEPOSIT, OPTION OF PAYMENT

　　甲乙雙方明確，該房地產的轉讓總價款：人民幣大寫_______________元（其中含車位轉讓款人民幣___________元）。乙方于簽署本協議時，支付誠意金人民幣__________________ 元至中介方，并委托中介方與甲方洽談；若甲方接受交易條件并簽署本協議，則乙方委托中介方將誠意金轉交給甲方作為款項。若至_ ___年_____月____日，甲方仍未簽署本協議的，則乙方有權至中介方處無息取回誠意金；若乙方未按時取回誠意金，則視為繼續委托中介方與甲方洽談。本協議簽訂當日乙方直接向甲方支付款項人民幣_____________________元。 甲方同意在本合同簽訂后 日內，乙方向甲方支付款項人民幣元，該款項由乙方或乙方授權的其他人以現金方式交付或支付至甲方的指定賬戶，若采用支付至甲方指定賬戶的，下述賬戶已為甲方所確認：

　　戶名：_________________ 賬號：___________________ 開戶行：________________

　　Party A and Party B expressly agree that the total transfer price of this real estate is CNY ________ inclusive of transfer price of carport as CNY _______. Party B agree that it shall pay Earnest Money as CNY ________ to Party C at this contract date and entrust Party C to negotiate with Party A. if Party A accept and sign this contract, Party B may authorize Party C to transfer such Earnest Money to Party A as deposit; provided, however, Party B may require the repayment of Earnest Money free of interests by Party C if Party A fail to sign this contract prior to ___________. In such event, it shall constitute that continue entrustment has been granted to Party C if Party B fail to take such Earnest Money in due time. Party B shall pay CNY __________ to Party A directly as deposit at this contract date. Party A agree that Party B may pay CNY __________ to it as deposit within ______ days from this contract date. Such deposit shall be paid in cash by Party B or its designee or made through T/T to the following bank account affirmed by Party A: Account Holder: ________Bank Account: _______ Bank Name: _________

　　三、 【買賣交易細則】

　　3. SALES RULES

　　1) 轉讓總價款：人民幣大寫_______________ _________元（其中含車位轉讓款人民幣大寫______________________ 元）。

　　2) 雙方同意按以下方式支付款項：

　　第一筆房款： 甲、乙雙方同意自《上海市房地產買賣合同》示范文本簽訂后_____日內，乙方向甲方支付的上述款項 人民幣_________元作為乙方支付的首筆房款。

　　第二筆房款：乙方于______年_____月_____日前，支付甲方房款人民幣___________________元。

　　第三筆房款：可按以下情況選擇支付方式： □ 乙方通過銀行按揭貸款的方式向甲方支付第三筆房款人民幣__________________元，該款項由 銀行在取得抵押人為乙方的他項權利證明后直接劃入甲方帳戶。 □ 甲乙雙方同意共同至房地產交易中心辦理該房地產過戶手續，并取得房地產登記處的核發的收件收據后_____日內，乙方向甲方支付房款人民幣________________元。

　　第四筆房款：□在辦妥房屋交付手續當日，乙方向甲方支付房款人民幣___________________元。 □甲乙雙方同意，在簽署買賣合同時將交房款人民幣____________元交丙方監管至房屋交付手續辦妥之日，丙方憑《房屋交接書》向甲方支付上述款項。

　　1） The total transfer price of this real estate is CNY ________ inclusive of transfer price of carport as CNY _______.

　　2） Such transfer price shall be made in installments as follows:

　　The first installment shall be made to Party A by Party B as CNY ________ (inclusive of deposit) within ______ days from commencement date of Sales Contract for the Real Estate Located in Shanghai City (“Sales Contract”).

　　The second installment as CNY ______________shall be made to Party A by Party B prior to ___________. The third installment may be made as follows:

　　□ CNY _________ as third installment shall be made to Party A by Party B through bank mortgage loans, which shall be directly paid to Party A’s bank account upon the certificate evidencing Party B as mortgagor has been presented to the lending bank, provided, □ Party A and Party B agree to fulfill the transfer formalities for this real estate before Real Estate Trading Center and Party B shall pay Party B CNY _____________ within _____days upon the certificate issued by real estate register has been received.The fourth installment as CNY _____________ shall be paid. □ To Party A by Party B at the date on which the transfer formalities of this real estate has been fulfilled; or □ to Party A by Party C upon the receipt of Deed of Transfer if, as agreed by Party A and Party B, CNY _______ equal to such fourth installment has been delivered to Party C for escrow until the full fulfillment of transfer formalities.

　　3） 產權過戶：待該房地產之抵押登記（若有）已經注銷且乙方申請的按揭貸款（若有）經銀行審核通過，具備過戶條件具備后，最晚不遲于______年_____月_____日，共同至該房地產所在區交易中心辦理房地產過戶手續。

　　3）Transfer. Within _____ days upon the revocation of mortgage registration for this real estate (if any) and the loans acquired by Party B therefore (if any) satisfying the applicable requirements after the review of related bank (in no event late than _______), Party A and Party

　　B shall fulfill the transfer formalities before the trading center of that district where this real estate is located.

　　4） 房屋交付：甲方于收到乙方全部轉讓款項當日，將該房地產交付乙方，雙方應簽署《房屋交接書》。交付前的物業管理費及公用事業費由甲方承擔，交付后的物業管理費及公用事業費由乙方承擔。固定裝修、附屬設施設備以及經甲乙雙方確認的家電、家具等價格已經包含在該房地產轉讓總價款內，甲方須保證該房屋內附屬設施、設備均能正常使用及室內裝飾與簽訂買賣合同之日的`狀況相符。

　　4）Delivery. At the date on which all transfer prices，party A shall deliver this real estate to Party

　　B and the Certificate of Transfer and Handover shall be concluded by the Parties therefore. Property Management Fees and Utilities Expenses arising out of or in connection with this real estate shall be borne by Party A prior to such delivery, or shall be borne by Party B upon such delivery.

　　Charges or expenses related to the fixtures and ancillary equipments & facilities of this real estate, as well as the prices of home appliances and furniture agreed by the Parties, have been included in the transfer price and Party A guarantee that all such ancillary equipments & facilities may work properly, all interior decorations thereof satisfy the conditions provided herein .

　　5）相關費用：Miscellaneous Charge.

　　[交易稅費]：雙方同意，交易中所涉及的上述買賣雙方的稅費由 □各自承擔并支付；□由甲方承擔并支付；□由乙方承擔并支付。

　　[公證費]：若交易涉及買賣合同公證，費用由□雙方分擔并支付；□由甲方承擔并支付；□由乙方承擔并支付。

　　[中介報酬]：對于中介方提供中介服務所產生的報酬事宜，詳見附件“中介服務確認書”。 Trade Tax. The Parties agree that any and all taxes and charges arising out of transaction hereunder shall be borne and paid by □ Party A; or □ Party B.

　　Notary Fees. Any notary fees arising out of or in connection with transaction hereunder shall be borne and paid by □ Party A; □ Party B; or □ Party A and Party B. Brokerage

　　fees. Brokerage feess paid to broker for any brokerage service provided shall be detailed in attached Schedule “Acknowledgement of Brokerage fees”.

　　四、【法律責任的選擇適用】

　　4. APPLICATION OF LEGAL LIABILITIES

　　甲方保證該房地產產權清晰、權屬明確，無異議登記、單方預告登記，無司法、行政查封等限制性交易情形存在；若因本條所述情況導致本協議效力瑕疵，甲方應返還乙方所有已付房款并賠償乙方實際損失。

　　Party a guarantees that it has full and clear ownership to this real estate, which is free of any dispute registered, unilateral advanced registration, judicial or administrative attachment or other events restricting trades. If any defect affecting the validity of this Contract is occurred due to any misrepresentation hereunder, Party A shall refund all transfer prices paid by Party B, and indemnify any and all losses and damages suffered by Party B there-from.

　　五、【爭議解決】

　　6. DISPUTE SETTLEMENT

　　各方在本協議履行過程中發生爭議的，應友好協商；協商不成的，應向該房地產所在地人民法院起訴。

　　Any dispute arising out of or in connection with the performance hereof shall be settled by amiable negotiation, if fails, either Party may bring a lawsuit before the People’s Court with jurisdiction where this real estate is located.

　　六、【合同效力】

　　6. VALIDITY

　　本協議自甲、乙雙方簽署起對甲、乙生效，丙方簽署后對丙方生效，一式三份，甲、乙、丙三方各執一份。

　　This Contract shall have binding force to Party A and Party B upon signatures of such two Parties are made hereon, and shall have binding force to Party C if signature of Party C is also made hereon. This Contract shall be executed in triplicate and each Party shall have one copy.

英文合同 篇4

　　甲方： Party A: 法定代表人(主要負責人)或委托代理人： Legal Representative (main responsible person) or Entrusted Agent: 地址： Address:

　　乙方： Party B (Employee): 性別： Gender: 通訊地址： Communication Address: 居民身份證號碼 ID Card No.: 聯系電話： Telephone:

　　根據《中華人民共和國勞動法》、《中華人民共和國勞動合同法》的有關規定，雙方遵循公平合法、平等自愿、協商一致、誠實信用原則，訂立本合同。 The contract is hereby concluded by both parties in accordance with Labor Law of the People's Republic of China, Labor Contract Law of the People’s Republic of China, in the principles of fairness, legitimacy, equality, voluntariness, consensus through negotiation and good faith.

　　一、勞動合同期限

　　Contract Term

　　第一條 本合同為固定期限勞動合同。 本勞動合同期限為 年，其中試用期至 年 月日止。本合同于 年 月 日終止。

　　Article 1 : Party A and Party B signs a fixed-term labor contract. The contract lasts for ___ year(s), from _________to ________. Theprobation is ____ month(s), from ________ to ________.

　　二、工作內容和工作地點

　　Working Contents and Working Place

　　第二條 乙方同意根據甲方工作需要，擔任 崗位(工種)工作。

　　Article 2 : Party B agrees to engage in_____________(post, work posts) according to needs of the Party A.

　　第三條 乙方的工作地點為: 。 Article 3 : The working place of Party B is ______________.

　　三、工作時間和休息休假

　　Working Hours and Rest Hours

　　第四條 甲、乙雙方同意按以下方式確定乙方的工作時間(正常工作時間：

　　上午8：30—11：30，下午：12：30—17：30，11：30—12：30為午餐時間。)： 標準工時制，即每日工作 小時，每周工作 天。

　　Article 4 : Both parties agree Party B’s working hours are specified as follows (normal working hours: 8:30 – 11: 30, 12:30 – 17: 30; lunch time: 11:30 – 12: 30.) : Standard working hours system, i.e. ____ hour(s)/day, ____ day(s)/week;

　　第五條 乙方依法享受國家規定的法定節假日。

　　Article 5 : Party B is entitled to have the legal holidays stipulated by the country.

　　四、勞動報酬

　　Labor Remuneration

　　第六條 甲方每月 日以貨幣的形式足額支付乙方工資，結算周期為上月月到上月月末，實行先工作后發薪的制度。乙方正常工作基本月薪 。

　　Article 6：Party A shall pay off salary to Party B in currency on the of every month. The pay period is from the beginning to the end of last month. Party

　　B works before paid.

　　乙方在試用期期間的工資為 元。 Party B’s normal basic salary is ________. Party B’s probation period salary is RMB________.

　　第七條 甲方調整乙方工作崗位的，根據乙方能力及其相關職位，雙方協商一致后調整乙方勞動報酬。

　　Article 7: Party B’s labor remuneration will be adjusted as per Party B’s competence and job requirements on the basis of consensus in case Party A adjust Party B’s job.

　　五、社會保險及其他保險福利待遇

　　Social Welfare and Benefits

　　第八條 甲方按國家和地方政策規定為乙方辦理社會保險有關手續，并承擔相應的義務。 Article 8 : Party A shall deal with the relevant formalities of social security for Party B according to the country and local policies and take up the relevant liabilities.

　　第九條 乙方患職業病或因工負傷后的工資和醫療補助執行按照國家和地方的有關法律法規執行。 Article 9: The salary and Medicare benefits of Party B in case of occupational diseases or work-related injuries shall be paid in accordance with the relevant national an local laws and regulations.

　　第十條 乙方患職業病或因工負傷的`待遇按國家的有關規定執行。

　　Article 10: If Party B suffers illness or non-work related injury, Party A shall implement relevant state provisions.

　　六、勞動保護、勞動條件和職業危害防護

　　Labor protection, labor condition and occupational harm prevention and cure

　　第十一條 甲方根據生產崗位的需要，按照國家有關勞動安全、衛生的規定為乙方配備必要的安全防護措施，發放必要的勞動保護用品。 Article 11: Party A shall equip Party B with the necessary safety protection measures and issue the necessary labor protection articles according to the needs of the post and the rules of the labor safety and hygiene.

　　第十二條 甲方應當建立、健全職業病防治責任制度，加強對職業病防治的管理，提高職業病防治水平。

　　Article 12 : Party A shall set up and optimize the occupational disease cure responsibility system, enforce the management over the occupational disease and promote the cure level of the occupational disease.

　　七、勞動合同的解除、終止和經濟補償

　　Change, Cancellation, Termination and Renewal of the Labor Contract

　　第十三條 甲乙雙方解除、變更、終止、續訂勞動合同應當依照《勞動合同法》和國家及省、市等有關規定執行。

　　Article 13 :If the parties revoke, modify, terminate and extent the labor contract, they shall perform them according to the relevant rules of the LaborContract Law and the country, province and city etc.

　　第十四條 甲方應在解除或者終止勞動合同時，為乙方出具解除或者終止勞動合同的證明，并在15日內為勞動者辦理相關手續。乙方應在甲方出具解除或者終止勞動合同的證明后10日內辦理工作移交，如涉及經濟補償?shù)陌磭�家有關規定在辦結工作交接時支付。

　　Article 14 ：Upon the revocation or termination of the labor contract, Party Ashall issue the certification for revocation or termination of the labor contract to Party B and deal with the relevant formalities for the laborer within fifteen

　　(15)days. Party B shall make the work handover within ten (10) days after issuance by Party A of the certificate of revocation or termination of the labor contract Regarding any economic compensation, they shall be paid upon the handover of the work according to the rules of the country.

　　八、勞動爭議處理

　　Labor Dispute Resolutions

　　第十五條 雙方發生爭議，任何一方當事人可向甲方所在地的勞動爭議仲裁委員會申訴，由仲裁委員會依法調解或裁決。如對仲裁不服，向甲方所在地人民法院起訴，一方當事人期滿不起訴但又不執行裁決的，另方當事人可向人民法院申請強制執行。

　　Article 15 ：In case disputes arise between two parties, either party can appeal to

　　labour disputes arbitration commission at party A’s location, subject to mediation or adjudication by arbitration commission. In case of disobedience of arbitrationresult, either party can sue to the court at party A’s location. Either party neitherbrings the lawsuit during the valid period nor performs the adjudication; the otherparty has the right to apply for forcible execution to the court. 第十六條 乙方承諾本合同乙方通訊地址為甲方向乙方寄送郵件信函的地址，甲方按該地址寄送的郵件信函如無法送達被退回即視為該郵件已送達乙方。 Article 16 ：Party B promises his correspondence address of the contract shallbe the address that Party A sends the letters or mails to Party B. If any letters ormails are not returned or undeliverable after Party A sends them, it is deemed thatthey have arrived at Party B. 第十七條 本合同未盡事宜，應按國家現行法律、法規、規章執行。本合同條款如與國家法律、法規、政策相抵觸時，以國家規定為準。

　　Article 17：Affairs unmentioned in this contract shall be executed accordingto present laws, statutes and regulations of the state. In case any contradictionarises between the articles of this contract and laws, statutes or policies of the state,the latter shall be referred to as final.

　　第十八條 本合同一式兩份，甲乙雙方各執一份，經甲乙雙方簽字蓋章后生效。

　　兩份合同具同等法律效力。 Article 18 ：The contract is in duplicate, held by Party A and Party B respectively. The contract comes into effect upon signatures or seals of both parties. The two copies areequally authentic.

　　甲方(公 章)： Party A： 法定代表人(主要負責人)或委托代理人

　　乙方：

　　簽訂日期：

　　Date:： 年 月 日 Legal Representative or Entrusted Agent: (signature or seal) Party B:

英文合同 篇5

　　供方向需方提供______ 類產品(具體產品名稱、編號、規格及單價等詳見報價單)，供需雙方本著平等互利、協商一致的原則，簽訂本合同，以資雙方信守執行。

　　Under the principle of mutual equality and benefit, the Supplier is to provide Demander with ______products (refers to the price quotation sheet for the name, code, specification and price of the products). Both parties agree to enter into this contract for execution.

　　一、合同定義： Definitions:

　　1、 采購合同：是指包括本合同以及依據本合同所簽訂生效的相關訂單、合同附件和補充規定，以及雙方不時簽署或確認的工程、計劃、規格變更通知等在內的全部書面文件。

　　Procurement Contract means all written documents, including this contract and the relevant order entered into and validated under this contract, attached files and supplementary regulations to this contract, and such notices as modifications to project, schedule and specification signed and confirmed by both parties from time to time.

　　2、 價格：指由雙方協商確定的產品價格，以雙方簽字生效的報價單為準。 Price means the price of the products on the price quotation sheet validated and signed by both parities.

　　3、 產品：指在生效采購合同、訂單、報價單或雙方簽署的規格，質量，維修條款/協議中所列的由供方提供給需方的產品和/或服務，在本合同中，產品與服務統稱為產品。

　　Product means any products and/or services the Supplier provide to the Demander under the effective procurement contract, order, price quotation sheet or specification, quality and maintenance terms and conditions / agreements signed by both parties, and refer to both the products and services in this contract.

　　4、 生效訂單：指需方發給供方并經供方依照雙方約定或需方要求的方式在相應時間內進行確認后的，包含產品型號、數量、價格、交貨條款、支付條款

　　等內容的正式訂貨通知，是授權供方按照本合同履行交貨義務的文件。 Effective Order means an formal order-placing notice containing such content as model, quantity, price, delivery conditions and payment conditions of the products, delivered from the Demander to the Supplier and confirmed within the corresponding time, by the means agreed upon by both parties or the means requested by the Demander, which is a document authorizing the Supplier to exercise its responsibility to deliver the products under this contract.

　　5、 需方商標：指需方擁有的?TCL?、?TCL-legrand?、?LEGRAND?或以上文字或圖形的任意組合以及需方目前擁有的或現在正在申請的、或?qū)�來所有的其他商�?biāo)或其它標識。

　　Demander’s Trademark means any name or sign containing either TCL, or TCL International Electrical, or Legrand or any combination of the foregoing which is currently owned by the Demander and application is being lodged or will be lodged for trademark or logo.

　　6、 產品支持文件：是指任何產品說明書、圖紙、電路圖、用戶手冊、市場推廣材料、合格證及其他類似的文件資料。

　　Product Supporting Document means instruction, drawing, circuit diagram, user’s manual, marketing materials, quality certificate and any other similar document information for any products.

　　二、 采購合同效力： Effect of Procurement Contract::

　　1、 本合同的條款和條件均適用于依據本合同所制定生效的附則、訂單、報價單及補充協議、相關修訂書。供方和需方將就需方依據本合同采購的不同產品的價格、技術規定、品質標準及維修服務另行簽訂附則，作為本合同的補充。 The terms and conditionns under this contract are applicable to supplementary articles, order, price quotation sheet and supplementary agreement and their relevant revisions entered into and validated under this contract. Supplementary articles concerning price, technical specification, quality standard and maintenance service for various products shall be entered into by the Supplier and Demander in accordance with this contract, which shall act as the supplement to this contract.

　　2、 本合同的簽署并不表明需方有義務購買供方的產品，本合同也不限制需方向其他貨源采購與供方所提供產品相同或類似的產品。需方采購供方產品的義務僅在生效訂單下才對需方有法律約束力。

　　The signature of this contract does not imply that the Demander is liable for purchasing products from the Supplier, nor restricts the Demander to purchase the products identical or similar to the Supplier’s from sources other than the Supplier. The Demander is only legally bound upon placement of effective order for products from the Supplier.

　　三、價格及付款：Price and Payment:

　　1、 需方向供方提供產品報價單格式。供方在雙方約定或需方要求的期限內，根據需方所提供的報價單格式填寫相應內容并交需方確認(如無另行約定，供方應自收到需方報價單格式之日起三個工作日內將相應內容交需方進行確認)。經需方書面接受的報價單上之價格為正式生效的產品報價，雙方應全面履行。經雙方確認并生效的幾份或數份報價單之間，以最后生效的報價單所載的內容為當前階段(報價和期間)為生效執行的產品價格(和期間)。對于需方要求提供的成本結構清單，供方需要在報價單的同時按照需方要求格式附帶提供相應文檔。

　　The Demander shall provide a price quotation form format to the Supplier. The Supplier shall fill in the price quotation form and send it back to the Demander for confirmation within a period of time agreed upon by both parties or requested by the Demander (unleotherwise agreed upon, the Supplier shall fill in the form and send it back to the Demander with three (3) working days after receipt of the price quotation form format from the Demander). The price on the price quotation sheet accepted by the Demander in writing represents the formally validated product price and shall be complied with by both parties. The content specified in the price quotation form last validated represents the current product price and shall be executed by both parties when a number of price quotation forms have been confirmed and validated in between. The relevant document containing Cost Structure demanded by the Demander shall be provided in the form as required by the Demander.

　　2、 供方對需方的報價必須遵循誠信的原則，供方不得采取向研發/工程部門報以低價，而向采購部門報以高價等不誠信行為;一旦發生類似情況，需方有權終止本合同并保留向供方索賠的權利。

　　The Supplier shall provide the price quotation to the Demander on principle of honesty. Upon discovery of such dishonest activities as the Supplier quoting a lower price to research and development department while quoting a higher price to procurement department, the Demander reserve the right to terminate this contract and reserve all rights to claim against the Supplier.

　　3、 合同產品經需方檢驗合格入庫后，電匯____ 天 或 承兌____ 天(如應供方要求,需方提前支付貨款,則供方需承擔對應期間的資金利息,雙方約定計息標準為年利率6%)。

　　After the products specified in contract are inspected and checked in the warehouse by the Demander, Demander should execute the payment by T/T (telegraphic transfer) on ____ days or acceptance bill on ____ days (if advance payment is made by the Demander as requested by the Supplier, the interest incurred from the advance payment during the corresponding period is payable by the Supplier at the annual interest rate of 6% as agreed upon by both parties).

　　4、在合同有效期內，如果單價高于當時市場價的3%，需方有權在任何時間重新審核確認單價。

　　Demander reserves the right to review the price at any time during the contract in case find that it is above the market price by more than 3% .

　　四、訂單：Purchase Order:

　　1、 需方給供方下達網上訂貨單(若無共享網絡資源的需下達書面訂單)，應在訂貨單中明確交貨日期及每次的交貨數量，并通知供方;供方應遵守訂貨單所載內容交貨，除非雙方事先以書面形式同意變更訂貨單的約定內容外，供方的交貨不得與訂單的約定內容有異。

　　The Demander shall specify the quantity of products to be delivered each time and the delivery date on the online purchase order (purchase order in writing shall be made if the Demander has no acceto internet) and notify the Supplier. The Supplier shall deliver the products as specified on the purchase order. The delivered products by the Supplier shall not be inconsistent with the purchase order, unleprior consent is made by both parties in writing.

　　2、 供方接到訂貨單后，如是正常訂貨，供方應于接到訂單兩日(需方的`工作日)以內，如是緊急訂貨應于接到訂單一日(需方的工作日)以內，以書面?zhèn)髡婊貜?fù)需方進行確認;如超出期限無供方的回復，即表示供方同意需方訂貨單所載的交貨要求。供應商確認的交貨周期不得超過本協議附件中規定的各項時間期限。

　　The Supplier shall reply to the Demander in writing by way of Fax for confirmation within two (2) working days (demander’s working day) after receipt of the normal purchase order or within one (1) working days (demander’s working day) after receipt of the emergency purchase order. If no reply is made by the Supplier within such foregoing period, the Supplier is deemed to have agreed the product delivery requirement specified on the purchase order. The delivery time which the supply confirmed can’t exceed the time on the attached files agreed by both parties.

　　3、 由于市場變化或其他不可預測因素導致需方對產品需求發生變化時，需方可變更或中止相關生效訂單，需方應盡快通知供方，具體相關事宜由雙方另行協商確定，并形成書面文件。

　　The Demander may change or terminate the relevant effective purchase order in case that the demand of the products is changed due to the change of the market or other unpredictable factors. The Demander shall notify the Supplier of such change or termination of the relevant effective purchase order in a timely manner. Details arrangement shall be agreed upon by both parties and developed into a written document.

　　五、交貨和包裝： Delivery and Packaging:

　　1、 交貨：Delivery:

　　1.1 除非雙方另有約定，本合同的交貨是指由供方或供方委托的人員或機構將產品交到需方倉庫，與需方倉庫責任人辦理交貨手續，并同時提供有關產品的

　　單證和資料，并承擔相應費用(包括但不限于運輸、保險及卸貨的費用)。 Unleotherwise agreed upon by both parties, delivery under this contract means that the Supplier, or the personnel or institution authorized by the Supplier deliver and turn over the products to the responsible person of the Demander’s warehouse, with provision of relevant certificate and information of the products concerned, and bear the relevant cost (including but not restricted to transport, insurance and unloading cost).

　　1.2 供方必須滿足經(雙方)確認的生效訂單中交貨期的要求，按時交貨。當需方要求提前交貨時，應通知供方，供方應采取適當?shù)拇胧�，努力滿足交貨要求;若確實無法滿足，應于收到需方通知之日起一個工作日內，以書面形式向需方告知最早的交貨時間和數量。

　　The Supplier shall deliver the products on time as specified on the effective purchase order confirmed by the both parties. If the Demander needs an advance delivery, the Demander shall notify the Supplier who shall endeavor to satisfy such request by taking appropriate actions, or shall notify the Demander in writing of the earliest possible delivery time and quantity within one (1) working day after receipt of the notice from the Demander.

　　1.3 除非需方要求或同意，供方的交貨時間不得提前，否則視為不按時交貨，需方有權拒收。

　　The Supplier shall not deliver the products ahead of the schedule, unledemanded or consented by the Demander. Delivering the products ahead of the schedule is deemed to be Supplier’s failure to make the delivery on time, and the Demander reserve the right to refuse to accept such product.

　　1.4 因供方原因遲延交貨，導致需方不能向第三人緊急出貨時，需方有權向其它方采購，并且由此產生的費用由供方承擔;且如因此導致需方遭受損失時，供方需賠償其損失;若因不可抗力的天然災害所導致的交貨延遲，則供方不須賠償或負擔其費用。

　　The Demander reserve the right to procure the products from other sources under the circumstance that the Demander fails to make the emergency delivery of the products to the third party due to the delayed delivery of the products from the Supplier who is responsible for any cost incurred from the procurement from other sources. The Supplier shall compensate the Demander for any loincurred from the delayed delivery of the products which is due to any causes other than force majeure including natural disaster.

　　1.5 如應需方的要求必須更改訂單所記載的訂單內容，應由雙方協商后，形成書面文件。

　　Any changes to the content of the purchase order as requested by the Demander shall be agreed upon by both parties and developed into a written document.

　　2、 包裝：Packaging:

　　2.1 除非另有規定，包裝物應由供方提供并自負費用，包裝物上的裝運標志必須符合需方要求。

　　Unleotherwise specified, the Supplier shall provide and pay for the packaging materials, and the packing logo on the package shall be compliant with the requirement of the Demander.

　　2.2 供方應保證所提供的包裝物符合運輸、產品安全的要求;供方應采用合適的安全措施，妥善包裝貨物，達到防潮、防濕、防震、防塵等要求;雙方對包裝方式另有約定的，應遵守雙方約定;因包裝不符合規定造成產品損壞、滅失或其他損失的責任由供方承擔。

　　The Supplier shall ensure the packaging materials provided comply with the requirement for transport and safety of the products, and shall take all appropriate precautious measures against damp, humidity, vibration and dust. The products shall be packed by the means agreed upon by both parties. The Supplier shall be liable for any damages, losses from the products or any other losses arising from non-compliance with packaging specification.

　　六、收貨及檢驗： Acceptance and Inspection:

　　1、 雙方應按照約定交貨方式進行交貨;需方應于供方產品送達約定地點后清點合同產品，核對產品數量、名稱、包裝等，并辦理收貨確認手續。

　　The products shall be delivered to the Demander by the means agreed upon by both parties. The demander shall check for the quantity, name and package of the products as specified on the purchase order for takeover

　　confirmation at the delivery destination agreed upon by both parties.

　　2、 產品驗收按照雙方確認的樣品、圖紙、《檢驗標準書》、《檢驗規格書》進行。未約定的驗收內容有國家或行業標準的，應符合相關標準;無標準的以滿足需方實際需求為準。

　　The products shall be accepted in accordance with such acceptance criteria as product sample, the diagram, Inspection Criteria, Inspection Specification agreed upon by both parties, or in accordance with national standard or industry standard if no acceptance criteria is provided, or in accordance with the actual need of the Demander if no standard is available

　　3、 產品驗收合格不表示產品質量合格， 。若供方產品在需方生產或消費使用過程中，因產品出現嚴重質量問題或存在缺陷而造成需方的直接及間接損失均由供方承擔。

　　The accepted products do not mean quality passed. The Supplier shall be liable for any direct and indirect losustained by the Demander arising from serious quality problems or defects of the products found in the course of using or consuming the products supplied by the Supplier.

　　七、品質保證： Quality Assurance:

　　1、 除非另有約定，供方交付的產品應符合： ①本合同?陳述和保證?及本條款等規定的內容; ②經雙方確認的產品技術規格，檢驗標準以及雙方不時簽發和確認生效的相關修訂書，工程、計劃、規格變更通知等文件總規定的標準;

　�、凵�效訂單中規定的標準，以及封樣樣品表示的標準。上述標準之間如有沖突，則按照最新確認的標準執行，無法確定標準確認時間的，按照較高標準執行。

　　Unleotherwise specified, the products delivered by the Supplier shall be in compliance with:①‘Representation and Warranty’ and the terms and conditions under this contract; ② product technical specification, inspection standard and their relevant revisions, and the criteria contained in notice of project, schedule and specification modification issued and confirmed by both parties from time to time; ③ criteria as specified on the effective order and as shown in the product sample. Should there be any conflicts among the criteria mentioned above, the criteria last confirmed, or the higher standard shall be executed if the time for the criteria confirmation fails to be identified.

　　2、 根據需方QA部的要求，供方應當配合《品質保證協議》的簽署工作，進行積極協調并達成雙方都能接受的共識，促成雙方成功簽署《品質保證協議》;雙方都有認真履行《品質保證協議》的義務。

　　The Supplier shall proactively cooperate with the Demander’s QA department to facilitate the signature of Quality Assurance Agreement and the generation of consensus acceptable to both parties. Both parties are liable for earnestly executing the Quality Assurance Agreement.

　　3、 雙方將來可對上述內容規定做更明確的補充規定，但該補充規定的標準高于上述規定的或有更具體的標準的，按補充規定執行;低于上述規定的標準的，按上述規定的標準執行。

　　Both parties may enter into more specific regulations supplemented to the regulations above. The supplement shall be executed if the criteria contained are higher than those of foregoing, or more specific criteria are provided. But the regulations above shall be executed if the criteria contained in the supplement are lower than those of the foregoing.

　　八、陳述和保證：Representation and Warranty:

　　1、 供方對其提供的產品享有合法的所有權，同時沒有索賠、扣押、抵押或其他行為存在或威脅到供方，以致妨礙到需方對產品使用和銷售。

　　The Supplier is entitled to the ownership of the products provided and there is no existence of any claim, impoundment, mortgage or any other threatened actions against the Supplier, which may lead to prevent the Demander from using and selling the products.

　　2、 對本合同的執行不會違反與其相關的任何合同條款、責任、法律、法規和法令，產品符合產品生產、儲存、銷售的強制性法律、法規規定的標準。

　　The execution of this contract shall not violate any related terms, responsibility, laws, regulations and decrees, and any applicable mandatory laws, regulations concerning product manufacture, storage and sale.

　　3、 產品是原廠新的且不包含任何用過的或修過的部件，并正常進口。 The products shall be newly-manufactured from the original manufacturer exclusive of any used or repaired components, and shall be imported through normal procedure

　　4、 供方產品及其產品支持文件不侵犯任何第三方的知識產權，需方不會因使用、銷售產品或產品的任何部分侵害任何第三方的知識產權。

　　The product and its supporting documents provided by the Supplier shall not infringe the intellectual property rights of any third party. Under no circumstance should the Demander be liable for infringement of intellectual property rights of any third party by using, selling the products in whole or in parts.

　　5、 遵守本合同?價格條款?的有關規定，不進行欺詐性報價。

　　The Pricing Terms under this contract shall be abided by and no fraudulent price quotation is allowed.

　　6、 由需方提供給供方用于為需方進行產品制作的物料，僅限于為需方進行生產;供方需提供固定的、安全的倉庫進行儲存，在其使用前，供方應對該物料的性能、數量、品質等負責，如必要，需承擔相關保險的費用。

　　The manufacturing materials provided from the Demander to the Supplier shall be only used for manufacturing the products. The Supplier shall provide a robust and safe warehouse to store such materials and shall be responsible for the performance, quantity and quality of such materials before the usage, and shall be liable for any cost in association with the insurance if necessary.

　　7、 關于貨品制造上必須使用的模具;

　　The mold which has to be used for the product manufacturing: 雙方需制定模具采購/保養合同，該合同中應包含關于模具價格、付款、所有權、保管、保密、技術協議等內容，雙方均需按照此模具采購合同執行。 Mold Procurement and Maintenance Agreement, which contains such content as price, payment, ownership, storage, confidentiality and technology agreements shall be entered into and executed by both parties.

　　8、 知識產權：Intellectual Property Rights: 8.1 使用許可：除非另有約定，供方向需方提供的本合同涉及的產品并不視為該產品所含有的供方擁有或控制的任何知識產權的轉讓;但對于需方在加工、組裝、使用或銷售產品時必須擁有知識產權許可的產品，供方依據本合同有權并已經向需方授予了該知識產權的符合本合同目的的使用許可。

　　Usage License: the provision of the products from the Supplier to the Demander under this contract is not deemed to transfer any intellectual property rights contained in the products which is owned or controlled by the Supplier, unleotherwise agreed upon. The Supplier reserve the right to grant and has granted the Demander the Usage License for processing, assembling, using or selling the products which are intellectual property rights license required, in line with the objective of this contract.

　　8.2 需方提供的部件：如果需方提供部件供供方使用以履行本合同，則供方只能將需方提供的部件用于此目的。

　　Under the circumstance that the Demander should provide a component to the Supplier for the purpose of executing the contract, the Supplier shall only use such component provided by the Demander for such purpose.

　　8.3 在本合同項下需方提供的任何技術、設計及功能需求，其知識產權和財產權歸需方所有，此類技術、涉及或功能僅限于按需方要求移植到合同產品上去。 The intellectual property rights and property rights of any technology, design and functionality provided by the Demander under this contract belong to the Demander and such technology and involving functions shall only be transplanted onto the products as specified on the contract

　　9、 保密：Confidentiality:

　　9.1除了那些供方可從公開渠道或以正當途徑從第三方獲得的信息外，供方對任何從需方得到的與本合同相關的保密信息或需方經營/技術方面的信息，以及需方在交易談判過程中提供的有關涉及商業秘密的信息，供方在任何時候，即使在本合同終止后，也不得透露給任何人。當需方有要求時，供方應將包含這些信息的所有文件和材料退還需方。

　　Any confidential information acquired from the Demander or from this contract, or relevant to Demander’s busineand technology, and any information involving commercial confidentiality provided by the Demander in the course of negotiation shall never be disclosed by the Supplier to any other person even after the termination of this contract, except for those information which is available in public or formally acquired from the third party. The Supplier shall return all documents and materials containing such information to the Demander, upon request by the Demander.

　　9.2如根據政府法令或法律程序要求任何一方必須向政府、裁判機構或任何第三防提供上述資料，可按規定提供，但應盡快將此項事實通知對方。 Either party shall notify the other party in a timely manner of the fact that such information mentioned above has been disclosed to the government, supervisory institution or any third party as demanded by the government regulations or laws.

　　9.3 本合同任何變更、解除或終止均不影響本條款的效力。

　　The effectiveneof this term shall not be affected by modification, termination or expiration of this contract.

　　九、違約責任： Liabilities for Breach of Contract:

　　1、 供方未按照生效訂單要求的時間交付產品，應承擔逾期交貨違約責任，即每逾期一天，供方應支付訂單總金額的1%作為違約金。逾期十日仍未交付，需方有權解除該訂單的約束力，供方應承擔不能交貨的違約責任，即支付訂單總額一倍的違約金;

　　Should the Supplier fail to deliver the products by the time as required on the effective order, the Supplier shall be liable for the penalty arising from overdue delivery, namely by paying a penalty of 1% of the sum of payable on the order for every overdue day. Should the delivery is overdue for ten (10) days, the Demander reserve the right to discharge the binding force of the order and shall be liable for the penalty arising from failure to make the delivery, namely by paying a penalty of double that of the sum on the order.

　　2、 供方應交付驗收合格的產品，否則需方有權退貨，供方應在5日內重新送貨驗收，并承擔逾期交貨的違約責任。若再次驗收不合格，需方有權解除該次訂單，供方應承擔不能交貨的違約責任，即支付訂單總額一倍的違約金。

　　The Demander reserve the right to reject any products failed to be accepted by the Demander, and the Supplier shall re-deliver the products replacing those rejected within five (5) working days and be liable for the penalty arising from the overdue delivery. Should the products delivered for the second time fail to be accepted again, the Demander reserve the right to terminate such order and the Supplier is liable for the penalty arising from failure to make delivery, namely by paying a penalty of double that of the sum on the order.

　　3、 供方未按照訂單要求的數量交付產品，應在3日內補齊，并承擔相應的逾期交貨違約責任。

　　Should the products as specified on the order fail to be delivered in whole, the Supplier shall replenish the undelivered products within three (3) days and be liable for the penalty arising from the overdue delivery.

　　4、 需方應按約定付款，否則應承擔逾期付款的違約責任，即每逾期一天應支付未付貨款總額的萬分之五作為違約金。

　　The Demander shall make the payment agreed upon or otherwise be liable for the penalty arising from the overdue delivery, namely by paying a penalty 5? of the sum of outstanding payment for each overdue day.

　　5、 如需方確認為免檢產品的，由供方出具相關技術資料或品質保證書作為

　　合同附件，若因供方所供產品質量問題給需方帶來一切損失均由(供)方承擔。 Should the products be deemed to be inspection-free by the Demander, the Supplier shall provide all relevant technical information or quality assurance certificate as the attachment to the contract. The Supplier shall be liable for any losustained by the Demander arising from the quality problems of the products provided by the Supplier.

　　6、 本合同約定的違約金，作為違約的損失賠償。如約定違約金數額低于實際損失，以實際損失為準進行賠償。損失賠償包括合同履行后可以獲得的利益，但不得超過違反合同一方訂立合同時應當預見到的因違反合同可能造成的損失。 The penalty agreed upon under this contract is deemed to be the compensation for breach of contract. Should the agreed penalty be lower than the actual loss, the actual loshall be compensated. Locompensation may be inclusive of the attained benefit after execution of the contract, but shall not exceed the lopossibly incurred from breach of contract which should be foreseen in the time of entering into the contract by the violating party.

　　十、合同解除：Termination of Contract:

　　1、本合同任何一方均有權于另一方發生下列情形時解除本合同： Either party of the contract reserves the right to terminate this contract upon realization of any following circumstances:

　　1.1 一方遲延履行合同義務，導致另一方的合同目的不能實現的，或者一方遲延履行合同義務，經另一方催告后十天內仍不履行的。

　　Either party delays exercising its obligation under this contract, which causes the other party’s failure to realize the objective of the contract, or either party still fails to exercise its obligation within ten (10) days after being urged by the other party.

　　1.2 另一方已經提出破產申請或被他人提出破產申請，或進入其他類似的法律程序的。

　　Application for bankruptcy has been lodged by the other party or any other party, or similar legal procedure has been underway.

　　1.3 另一方經營狀況嚴重惡化。The busineof the other party is deteriorating.

　　1.4 另一方有轉移財產、抽逃資金、逃避債務的行為。 The other party is found to be transferring its property, removing its capital or evading its liabilities.

英文合同 篇6

　　CONTRACT

　　КОНТРАКТ

　　No.( Нет.)

　　Company Name:

　　And (и)

　　Company Name:

　　signed this Contract as following:

　　подписали настоящий Договор о следующем:

　　1. THE SUBJECT OF THE CONTRACT

　　Предмет контракта

　　1.1. The SELLER sells and the BUYER buys the following

　　Покупатель согласился купить, продавец согласен продать следующие продукты:

　　Место погрузки: КНР, г. Shenzhen

　　1.2 In case of discrepancies between the Chinese text, English text and Russia text of this contract , the English text shall prevail.

　　В случае расхождения, оригинальным признается вариант контракта на английском языке.

　　2. QUANTITY AND QUALITY

　　КОЛИЧЕСТВО И КАЧЕСТВО:

　　2.1. Quantity of the GOODS should supplied according to the Contract

　　Количество товара должно поставляться в соответствии с Договором

　　2.2. The BUYER and the SELLER bear the full responsibility for monitoring procedure of quality at mutual trust to each other.

　　The BUYER can send representative to SELLER’s warehouse to inspect the finished product.

　　The SELLER must control the product quality continuously. And the SELLER must keep paper record for some control process.

　　ПОКУПАТЕЛЬ и ПРОДАВЕЦ несут полную ответственность за проведение контроля качества при взаимном доверии друг к другу.

　　Покупатель может послать представителя для склада ПРОДАВЦА для проверки готовой продукции. Продавец обязан контролировать качество продукции непрерывно. И продавец должен держать бумаги запись в течение некоторого процесса управления.

　　2.3 Warranty time: within 18 months after buyer receipt of the goods

　　Время гарантированности: Все оборудование имеет заводскую гарантию 18 месяцев с момента получения оборудования покупателем.

　　3. BASIC TERMS OF DELIVERY OF GOODS

　　ОСНОВНЫЕ УСЛОВИЯ ПОСТАВКИ ТОВАРОВ

　　3.1 SELLER delivers the GOODS to the BUYER on terms of CIF , seaport Odessa, Ukraine, (According to the International terms Regulations, revision 20xx).

　　Продавец предоставляет товар в распоряжение покупателя на условиях CIF, морского порта Одесса, Украина, (В соответствии с Международными терминов Положения, пересмотр 20xx г.).

　　3.2 The delivery time is six months after received the down payment

　　Срок поставки через шесть месяцев после получил авансовый платеж

　　4. PRICE OF GOODS AND TOTAL AMOUNT OF THE CONTRACT

　　ЦЕНА ТОВАРОВ И ОБЩАЯ СУММА КОНТРАКТА

　　4.1 The price is fixed

　　цена фиксирована

　　4.1 The price for the GOODS is fixed in USD

　　Цена на товар фиксируется в долларах США

　　4.2 The total price of the contract is USD ,

　　Общая сумма контракта составляет: USD_____

　　4.3 Packing charges , international sea shipping and insurance costs are included.

　　Упаковка обвинения, международные морские перевозки и страхования затраты включаются.

　　5.TERMS OF PAYMENT AND DELIVERY

　　УСЛОВИЯ ОПЛАТЫ И ДОСТАВКА

　　5. 1 Down payment: 35% of total contract price paid by T/T. After receiving payment, the Seller starts producing equipment

　　Первый взнос: 35% от общей стоимости контракта оплачивается T / T. После получения предоплаты, Продавец начинает изготавливать оборудование

　　5.2 payment before delivery: 60% of total contract price paid by T/T. A After receiving payment, the Seller

　　shall deliver the equipments soon,

　　оплата до поставки: 60% от общей стоимости контракта оплачивается T / T. После получения

　　оплаты, Продавец поставляет оборудование в ближайшее время,

　　5.3Quality guarantee deposit: 5% of total contract price paid by T/T. After receipt of the equipment and check its packaging by the buyer within 7 days

　　качество гарантийный депозит: 5% от общей стоимости контракта оплачивается T / T. После

　　получении оборудования и проверки его комплектации Покупатель в течении 7 дней

　　6. PACKING AND MARKING

　　УПАКОВКА И МАРКИРОВКА

　　7. FORCE MAJEURE

　　ФОРС-МАЖОР

　　If the force majeure event occurs (War, civil strife, earthquakes, fires, floods, etc.)

　　The two sides could not foresee its occurrence, when the consequences of its impact on the contract, Disputing party needs to send the certificate documents to other party to prove the force majeure event occurs. The documents should send to other party within 10 days.This documents can avoid the responsibility.

　　Если происходит событие форс-мажор (Война, гражданские беспорядки, землетрясения, пожары, наводнения и т.д.)

　　Обе стороны не могли предвидеть его появление, когда последствия ее воздействия на договоре, оспаривая партию необходимо отправить сертификат документов другой стороне, чтобы доказать

　　происходит событие форс-мажорные обстоятельства. Документы должны отправить на другой стороной в течение 10 дней. Этот документ может избежать ответственности.

　　8. ARBITRATION

　　Арбитраж

　　All disputes arising from the execution of , or in connection with this contract, shall be settled amicably through friendly negotiation. In case no settlement can be reached through negotiation, the case shall then be submitted to The China International Economic and Trade Arbitration Commission, Beijing, China,for arbitration in accordance with its Rules of Arbitration.

　　9. OTHER CONDITIONS

　　другие условия

　　In all other respects, if any matter is agreed by both parties, the contract can make modify.

　　This contract is signed in two copies in English and Russian. Each party get one copy, each copy is legal Во всех других отношениях, если любой вопрос согласовывается обеими сторонами, договор может делать изменения.

　　10. BANK DETAILS

　　БАНКОВСКИЕ РЕКВИЗИТЫ

　　10.1 BUYER(Продавец):

　　10.2 SELLER(Продавец):

　　BANK INFORMATION(Реквизиты банка )

　　COMPANY NAME: Fuchun Ind Dev Co.,Ltd. Shenzhen

　　ADDRESS: 15E XINHAI BUILDING,NANSHAN AVENUE, NANSHAN DISTRICT, SHENZHEN 518052,CHINA

　　TEL: 86-755-26575526 FAX: 86-755-26575026

　　Bank A/C NO: 745859587561

　　Bank Name: SONG RI DING SHENG SUB-BRANCH, SHENZHEN BRANCH, BANK OF CHINA Address of Bank: Songridingsheng Building North, No 9996,Shennan Road,Yuehai Sub-District, Nanshan District, Shenzhen ,China

　　SWIFT CODE: BKCHCNBJ45A

　　11.SIGNATURE OF EACH PARTY

　　ПОДПИСЬ каждая сторона

英文合同 篇7

　　購 貨 合 同

　　PURCHASE CONTRACT

　　合同編號:

　　Contract No.:

　　簽訂日期:

　　Date：

　　簽訂地點:

　　Signed at:

　　買方：

　　The Buyers:

　　地址：

　　Address:

　　聯系人：

　　Contact:

　　電話(Tel):

　　傳真(Fax):

　　郵箱/E-mail：

　　賣方：

　　The Sellers:

　　地址：

　　Address:

　　聯系人：

　　Contact:

　　電話(Tel):

　　傳真(Fax):

　　郵箱/E-mail：

　　經買賣雙方確認根據下列條款訂立本合同：

　　The undersigned Sellers and Buyers have confirmed this contract in accordance with the terms and conditions stipulated below:

　　1. 商品名稱及規格

　　Name of Commodity & Specification

　　2. 數量

　　Quantity

　　3. 單價

　　Unit Price

　　4. 總金額

　　Amount

　　5. 包裝

　　Packing

　　6. 交貨時間

　　Delivery Time

　　7. 交貨地點

　　Delivery Place

　　8. 運輸方式

　　Means of Transport

　　9. 保險

　　Insurance

　　由_______方按發票金額的______%投保__________，加保______從______到______。

　　To be covered by for % of the invoice value covering additional from to

　　10. 付款條件

　　Terms of Payment

　　賣方收到50%定金后開始生產，發貨前買方付清余款。

　　After the receipt of 50% of the total value payment, the seller shall begin the production and the buyer pay the balance of the total value before delivery.

　　11. 裝運通知

　　Shipping Advice

　　一旦裝運完畢，賣方應立即電告買方合同號、品名、已裝載數量、發票總金額、毛重、運輸工具名稱及啟運日期等。

　　The sellers shall immediately, upon the completion of the loading of the goods advise the buyers of the Contract No. names of commodity, loaded quantity, invoice value, gross weight, names of vessel and shipment date by TLX/FAX.

　　12. 交貨原則

　　Delivery Policy

　　賣方在規定時間內所送貨物必須符合訂單要求，送錯或送少，應及時更換或補貨，否則，所帶來的損失由賣方全部承擔。

　　The sellers within the prescribed time delivery of goods must comply with the order request, sent to the wrong or the less, should be replaced or replenishment, otherwise, the losses borne entirely by the sellers.

　　13. 推遲交貨和罰款

　　Late Delivery and Penalty

　　如賣方?jīng)]有按照合同規定準時交貨，買方同意賣方付給罰款。加入賣方交貨期超過7天，買方有權取消合同。取消合同的.情況，賣方仍不能延誤付給買方上述罰款。

　　Should the Sellers fail to make delivery on time as stipulated in the Contract, the Buyers shall agree to postpone the delivery on condition that the Sellers agree to pay a penalty. In case the Sellers fail to make delivery later than 7 days, the Buyers have the right to cancel the Contract and the Sellers, in spite of the cancellation, shall still pay the aforesaid penalty to the Buyers without delay.

　　14. 不可抗力

　　Force Majeure

　　如因人力不可抗拒的原因造成本合同全部或部分不能履約，賣方概不負責，但賣方應將上述發生的情況及時通知買方。

　　The sellers shall not hold any responsibility for partial or total non-performance of this contract due to Force Majeure. But the sellers shall advise the buyers on time of such occurrence.

　　15. 爭議的處理

　　Disputes Settlement

　　所有與此合同有關的爭議應通過友好協商解決，如果協商不能解決，根據有關仲裁法則進行仲裁。仲裁應在深圳進行且其結果對雙方均有約束力，任何一方均不應向法院或其他政府部門申請以改變仲裁結果。仲裁費由負方負擔。

　　All disputes in connection with this Contract or the execution thereof shall be settled friendly through negotiations. In case no settlement can be reached, the case shall be submitted for arbitration ，in accordance with its Rules of Arbitration. The arbitration shall take place in Shenzhen and the decision of the Arbitration Committee shall be final and binding upon both parties; neither party shall seek recourse to a law court nor other authorities to appeal for revision of the decision. Arbitration fee shall be borne by the losing party. Or the Arbitration may be settled in the third country mutually agreed upon by both parties.

　　16.文字

　　Versions

　　本合同中、英文兩種文字具有同等法律效力，在文字解釋上，若有異議，以中文解釋為準。 This contract is made out in both Chinese and English of which version is equally effective. Conflicts between these two languages arising therefrom, if any, shall be subject to Chinese version.

　　17. 附加條款

　　Additional Clauses

　　本合同上述條款與本附加條款有抵觸時，以本附加條款為準

　　Conflicts between contract clause hereabove and this additional clause, if any, it is subject to this additional clause.

　　18. 本合同一式兩份，雙方各執一份，自雙方代表簽字/蓋章之日起生效。

　　This contract is made in copies, each party holds one, becomes effective since being signed/sealed by both parties.

　　買方（蓋章）：

　　The Buyer (seal):

　　代表（簽字）Representative (signature) ：

　　日期：

　　賣方（蓋章）：

　　The Seller (seal):

　　代表（簽字）Representative (signature) ：

　　日期：

【英文合同】相關文章：

英文合同07-06

英文合同(經典11篇)07-07

【熱門】英文合同4篇08-11

英文合同匯總10篇08-19

關于英文合同九篇10-02

【推薦】英文合同三篇09-29

實用的英文合同3篇08-05

英文合同集合九篇10-30

【必備】英文合同三篇06-01

關于英文合同6篇09-04